Intel® Pentium® M/Celeron® M Fan-less Transport PC with GSM/GPRS/GPS

NISE 3100

Specifications

Main Board
  • ICES 101 ETX Module
  • Supports ETX Module with Intel® Pentium® M/ Celeron® M processor, VGA/ISA/PCI/IDE/LVDS/Audio/COM/LPT/USB2.0/LAN interface
Main Memory
  • 1 x 200-pin SO-DIMM socket for up to 1GB Non-ECC Non-Registered DDR & SDRAM memory
I/O Interface-Front
  • Power / HDD Status LEDs
  • 1 LED, connect to GPIO, programmable for alarm or other application specific purposes
  • 1 x PCMCIA
  • 1 x External access CompactFlash socket (2nd CompactFlash)
  • 1 x USB 2.0
  • 1 x System Reset button
  • 1 x System Power-on Switch
  • Audio output with 1x RJ-11 to headset
  • 1 x GSM SIM-Card socket (COM1)
  • 1 x Reset button for integrated GSM/GPRS and GPS Module (COM2)
  • Antenna Mounting Holes for 2x SMA-type (WLAN and GPS) and 1x FME-type(GSM)
I/O Interface-Rear
  • 4x COM ports:
  • 2 x DB9 for COM3 and COM4 (Support RS-232)
  • 1 x screw terminal for COM5 and COM6 (Support RS-422/485)
  • 1 x RJ45 with LED for 10/100M bps Ethernet
  • 2 x USB 2.0 ports
  • 1 x DB15 VGA
  • 1 x DB26 for LVDS, 1x USB 2.0 and back-light voltage
  • 1 x DB9 Female for digital I/O with 4-input and 4-output
  • Audio interface with Line-in, Line-out, and Mic-in
  • +6 to +36VDC power input with 3-pin power input connector ignition and ground
  • +5 VDC and +12VDC power output to turn on/off fan with thermal control
Device
  • 1 x Front Access PCMCIA socket / CompactFlash socket
  • 1 x Internal CompactFlash socket
  • 1 x Internal 1.8”/2.5” HDD drive bay
  • 1 x NVRAM socket
Expansion Slot
  • 1 x Cardbus PCMCIA socket
  • 1 x PC/104+, with PC/104 x1 (ISA) and PCI 104 x1 (PCI)
  • 1 x Mini-PCI socket
Dimensions
  • 260 mm (W) x 176 mm (D) x 70 mm (H)
Construction
  • Aluminum chassis with fan-less design
Environment
  • Operating temperature:
    Ambient with air flow : -10°C to 50°C (with CF)
    T-case (Surface Temperature of Chassis): -10 °C ~ 55 °C (CF)
  • Storage temperature: -20°C to 80°C
  • Relative humidity: 10% to 90% (Non-condensing)
  • Vibration:
    Operating: MIL-STD-810F, Method 514.5, Category 20, Ground Vehicle–Highway Truck (within Anti-vibration bracket)
    Storage: MIL-STD-810F, Method 514.5, Category 24, Integrity Test (within Antivibrationbracket)
  • Shock:
    Operating: MIL-STD-810F, Method 516.5, Procedure I, Trucks and semitrailers 20g (within Anti-vibration bracket)
    Crash Hazard: MIL-STD-810F, Method 516.5, Procedure V, Ground equipment = 75g (within Anti-vibration bracket)
Certifications
  • CE approval
  • FCC
  • e Mark

» Systems overview | » Back to ISV Division main page | » Contact an Equus representative

Intel AMDMicrosoft Gold CertifiedRedHat LinuxSupermicroAdaptecLSI3WareSeagate